Simulation, Material Modeling

Conference presentation on simulation and testing for combination product design

Dr. Matthew Hancock and Dr. Sean Teller spoke at the Pre Filled Syringes and Injectable Drug Devices East Coast conference held in Boston, MA. They talked about “Multiphysics Simulation and Testing in Combination Product Design & Verification: Reducing Patient Risk.” Afterwards, they participated in a panel discussion.

Course offered at Adhesives and Sealants Council 2024 Annual Convention & EXPO

Dr. Scott Grindy was an instructor in the "Formulation Strategies Short Course" offered at the Adhesives and Sealants Council Annual Convention & EXPO, which took place in Louisville, Kentucky. Dr. Grindy discussed "Continuum and Fracture Mechanics based Testing and FEA of Bonded Joints."

Course on crucial techniques for high-rate mechanical testing

Dr. Sean Teller taught an online, 90-minute course on High Rate Mechanical Testing of Polymer Materials for Finite Element Simulation. He explained how to overcome challenges when conducting high-rate mechanical testing of polymer materials to produce accurate results and successful simulations.

Gold Sponsor of COMSOL Conference 2015

In addition to being a Gold Sponsor of this event, Veryst engineers presented four papers at the conference, including a plenary talk by Dr. Stuart Brown titled “Forensic Engineering: Multiphysics Simulation Unravels Elevator Brake Failure.”

Gold Sponsor of COMSOL Conference 2016

Veryst Engineering is proud to have been a Gold Sponsor once again of COMSOL’s premier event, and to have presented four papers at the conference.

Gold Sponsor of COMSOL Conference 2018

Veryst is proud to have been a Gold Sponsor of COMSOL Conference 2018 Boston. Veryst engineers presented a workshop, moderated a panel discussion, and more.

Gold Sponsor of two COMSOL conferences

Veryst Engineering is proud to have been a Gold Sponsor of two important COMSOL events: COMSOL Conference 2014 Cambridge (England) and COMSOL Conference 2014 Boston (Massachusetts).  This was a major event for those interested in multiphysics modeling and simulation.

Keynote speaker at COMSOL Day: AC/DC Simulations 2023

Dr. Nirmal Paudel was the keynote speaker at this free, online event where he discussed "Electromagnetic Modeling and Design of Magnetic Couplings." Dr. Paudel's presentation included demonstrating a workflow for designing a magnetic coupling using COMSOL Multiphysics and its parametric sweep functionality.

Participation in summit on modeling and simulation of medical devices

Dr. Stuart Brown participated in the first Medical Device Innovation Consortium Modeling and Simulation Summit. Dr. Brown presented on the "Importance of Accurate Material Models in the Simulation of Medical Devices."

Polymers expert is keynote speaker at NAFEMS Nordic Seminar

Dr. Jorgen Bergstrom discussed “Advanced Material Models for Rubbers, Thermoplastics, and Composites” as a keynote speaker at this event in Lund, Sweden.

Presentation at 2016 Adhesives & Sealant Convention

Dr. Mark Oliver spoke about “Experimentally Calibrating Cohesive Zone Models for Structural Automotive Adhesives” at the 2016 Adhesives & Sealant Convention. 

Presentation at adhesives and microelectronics packaging conferences

Dr. Mark Oliver made presentations on "Testing and Modeling the Mechanical Behavior of Flexible Adhesives" and on "Multiphysics Modeling of Underfill Flow and Cure During Thermocompression Bonding" at two industry conferences.

Presentation at Agency for Health Care Administration seminar

Dr. Alireza Kermani spoke about “Using Computational Fluid Dynamics (CFD) to simulate airflow in a hospital room,” addressing forced and natural ventilation and the flow of bacteria particles originating from a sick patient. 

Presentation at ANSYS Convergence Conference 2015

Dr. Jorgen Bergstrom presented a paper titled "Using Non-Linear Material Models in ANSYS Mechanical for Accurate Simulations" at the 2015 ANSYS Convergence Conference.

Presentation at ASME IMECE

Dr. Stuart Brown coauthored the “Child Resistant Closure Performance Aging Study” and presented this paper at the American Society of Mechanical Engineers International Mechanical Engineering Congress & Exposition.